London: 020 8936 7004
Surrey: 01932 690496
Mobile: 07337 450056
New UPVC
MK Roofing & Home Inspections supplies and installs uPVC fascia and soffit systems across South East London and the surrounding areas
uPVC is the most practical roofline material available. We install it correctly, first time, with no shortcuts on preparation or fixing.
New UPVC Enquiry Form
What Are uPVC Fascias and Soffits?
uPVC stands for unplasticised polyvinyl chloride. In practical terms it is a rigid, weatherproof plastic that has become the standard material for roofline installations across the UK over the past three decades. It replaced timber as the go-to choice for fascias and soffits because it does not rot, does not need painting, does not absorb moisture, and requires virtually no maintenance once correctly installed.
A uPVC fascia is the vertical board fixed to the ends of the roof rafters along the eaves, providing the fixing point for the guttering system above. The uPVC soffit sits horizontally beneath it, closing off the gap between the fascia and the wall and, where vented boards are used, allowing controlled airflow into the roof void to manage condensation and protect the roof structure.
What makes uPVC the right choice for most properties is not just durability. It is consistency. Unlike timber, it does not move significantly with seasonal temperature changes, does not require periodic treatment or repainting to maintain its protective function, and is available in a wide enough range of profiles and colours to suit everything from a Victorian terrace to a modern new build.
What Are uPVC Fascias and Soffits?
uPVC stands for unplasticised polyvinyl chloride. In practical terms it is a rigid, weatherproof plastic that has become the standard material for roofline installations across the UK over the past three decades. It replaced timber as the go-to choice for fascias and soffits because it does not rot, does not need painting, does not absorb moisture, and requires virtually no maintenance once correctly installed.
A uPVC fascia is the vertical board fixed to the ends of the roof rafters along the eaves, providing the fixing point for the guttering system above. The uPVC soffit sits horizontally beneath it, closing off the gap between the fascia and the wall and, where vented boards are used, allowing controlled airflow into the roof void to manage condensation and protect the roof structure.
What makes uPVC the right choice for most properties is not just durability. It is consistency. Unlike timber, it does not move significantly with seasonal temperature changes, does not require periodic treatment or repainting to maintain its protective function, and is available in a wide enough range of profiles and colours to suit everything from a Victorian terrace to a modern new build.
Contact The uPVC Team
Fascia & Soffit, Gallery
Why uPVC Rather Than Timber or Aluminium
Timber fascias and soffits require repainting every few years to maintain the protective film that keeps moisture out. When that maintenance lapses, moisture gets in, timber softens, and rot follows. The cycle of repainting, treating, and eventually replacing sections is one that uPVC simply removes from the equation.
Aluminium is a durable alternative but comes at a higher cost and with fewer profile and colour options suited to standard residential properties. It performs well in specific applications, particularly on contemporary builds and commercial rooflines, but for the majority of homes in South East London and Surrey, uPVC delivers equivalent longevity at a more practical price point.
The caveat with uPVC is installation quality. Boards that are not fixed at the correct intervals, systems where expansion joints have been omitted, or soffits installed without consideration for roof void ventilation will cause problems regardless of the material. We install to manufacturer specification on every job.
🔨 Our Other uPVC Locations 🔨
Take a look at some of our other uPVC Locations Here:
uPVC FAQs
Why is uPVC the most common roofline material?
It does not rot, does not need painting, resists moisture, and lasts well over 20 years with minimal maintenance. Compared to timber it removes the ongoing cost and effort of periodic treatment and repainting, and compared to aluminium it offers more profile options at a more practical price for standard residential properties.
Do you remove the existing roofline before installing uPVC?
Yes. We remove existing boards rather than capping over them. Fitting uPVC directly over timber without removing it traps moisture against the old board and accelerates the rot it was meant to prevent. We inspect the rafter ends and underlying structure before the new boards go on.
What profiles and colours are available?
We install fascia boards in standard and deep profiles and soffit boards in a range of widths to suit different roofline depths. Colours include white, black, grey, anthracite, and woodgrain finishes. We can advise on the most appropriate combination for your property during the site visit.
Do vented soffits make a difference?
Yes. Adequate airflow through the roof void is important for preventing condensation and protecting insulation and roof timbers from moisture damage. Where the existing roofline had ventilation we ensure the replacement maintains it. Where it was absent and ventilation would benefit the roof void we discuss that with you as part of the quotation.
Can uPVC be installed on older or period properties?
Yes, although profile selection matters more on older properties. Woodgrain finishes and ogee gutter profiles can complement period architecture more sympathetically than a standard white square-edge installation. We will advise on options that suit the character of the property.
How long does a uPVC roofline installation take?
Most standard residential installations are completed within a single day. Larger properties or those with more complex roofline configurations may take longer and we confirm the timeline with every quotation.
Does uPVC roofline add value to a property?
A clean, well-installed uPVC roofline improves kerb appeal and removes a maintenance concern for any prospective buyer. Whilst it is not the most significant value driver, a tired or visibly failing roofline can create a negative impression that a new installation resolves entirely.
Do you replace the guttering at the same time?
We can. Where guttering is ageing or failing it makes practical sense to replace it alongside the fascias and soffits rather than disturb the new installation at a later date. We assess the guttering during the site visit and include it in the quotation if required.
What areas do you cover?
South East London and surrounding Surrey areas including Kingston Upon Thames, Richmond, Twickenham, Epsom, Esher, Walton on Thames, Weybridge, and Croydon.
Are you an approved contractor?
Yes. MK Roofing & Home Inspections is approved by The Confederation of Roofing Contractors and carries full public liability insurance on all work.
How do I get a quote?
Contact us to arrange a free site visit. We inspect the existing roofline, confirm the right profile and specification for your property, and provide a written quotation with no obligation and no call-out charge.
How do I know when my roofline needs replacing?
Common signs include visible rot or cracking on timber fascias and soffits, sagging or detached guttering, damp patches in the loft near the eaves, and paint that is repeatedly peeling within a short period of repainting. If you notice any of these, an inspection is advisable before further deterioration affects the roof structure.
Will uPVC roofline work with my existing gutter brackets and fittings?
In most cases new fascia boards require new gutter brackets to be fixed correctly. We supply and fit all associated fixings and trims as part of the installation to ensure the finished roofline is secure, properly aligned, and weather-tight throughout.
Is planning permission required to replace roofline with uPVC?
In most cases replacing like-for-like roofline materials does not require planning permission and falls under permitted development. However, properties in conservation areas or those with listed building status may have restrictions on materials and finishes, and we advise checking with your local authority if you are unsure.